Sudeep Ingole, Ph.D.

Ignole

Office: PMEC 118

Tel:  (409) 741 - 402

Fax: (409) 741 -7153

E-mail: ingoles@tamug.edu

Background

Dr. Ingole has experience in materials research and development. He worked at Indian Institute of Science, Bangalore, India on high temperature mechanical properties of light metals and alloys and failure analysis. At GKSS Research Centre, Geesthacht, Germany, he was involved to develop and characterize the thixo-cast magnesium alloys and composites. Targeted applications for these alloys are automobile components.

He pursued his doctoral studies at University of Alaska, Fairbanks in 2005 in mechanical engineering with research focus on nano-tribological characterization of engineered surfaces and biomaterials. He was a visiting scholar at mechanical engineering, Texas A&M University, College Station, Texas, during his doctoral studies. Before joining TAMUG, he was working as a Postdoctoral Research Associate at mechanical engineering, TAMU College Station.

At Texas A&M University at Galveston, he teaches the courses in the area of engineering materials, mechanics and design.

Education

Ph.D.  Mechanical Engineering, 2005

University of Alaska, Fairbanks, AK, USA.

M.S.   Manufacturing Engineering, 2001

Indian Institute of Science, Bangalore, India.

B.E.   Metallurgical Engineering, 1999

Visveswaraya National Institute of Technology, Nagpur, India.

Research Interests

Surface structure-properties co-relationship, bio-nano-interfaces, particle interaction, nano-tribology, biomaterials, near-net shape manufacturing processes, coatings, and energy harvesting

Teaching Interests

ENGR111: Foundations of Engineering I

ENGR112: Foundations of Engineering II

MARE205: Engineering Mechanics: Statics

MARE206: Engineering Mechanics: Dynamics

MARE209: Mechanics of Materials

MARE309: Marine Construction Materials

MARE485: Sub-Sea Pipeline Engineering

MARE485: Experimental Design and Data Analysis

Publications

A)    Books and Reports

·  S. Ingole, “Nanotribological characterization of dynamic surfaces,” Ph.D. Dissertation, University of Alaska, Fairbanks, USA, 2005.

·  S. Ingole, “Study on the plaster of Paris mould castings,” Master of Engineering, Thesis, Indian Institute of Science Bangalore, India, 2001.

B)    Archival Journal

·  S. Ingole, A. Schwartzman, H. Liang, “In situ investigation of nanoabrasive wear of Si” Journal of Tribology, January 2007 129 (1) 11-16.

·  R. Ribeiro, S. Ingole, M. Usta, C. Bindal, A. H. Ucisik, H. Liang, “Tribological investigation of tantalum boride coating under dry and simulated body fluid conditions,” Wear, 10 May 2007, 262 (11-12), 1380-1386.

·  R. Ribeiro, S. Ingole, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “A tribological comparision of pure and boronized chromium.” Journal of Tribology, October 2006 128(4) 895-897.

·  R. Ribeiro, S. Ingole, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Tribological characteristics of boronized niobium in biofluid for biojoint applications,” Vacuum, 7 September 2006, 80 (11-12), 1341-1345.

·  Metin Usta , Ibrahim Ozbek, Cuma Bindal, Ahmet Hikmet Ucisik, S. Ingole, H. Liang, “A comparative study of borided pure niobium, tungsten and chromium,” Vacuum, 7 September 2006, 80 (11-12), 1321-1325.

·  R. Ribeiro, P. Asthana, S. Ingole, B. Shi, T. Kuhn, H. Liang, “Biocomposites: exploring surface texture for cell adhesion” Journal of ASTM International September 2005 2 (8).

·  S. Guruzu, M. Kulkarni, S. Ingole, G. Xu, C. Chen, H. Liang, “Friction induced crystalline phases on Si” Wear (2005) 259 (1-6) 524-528.

·  S. Ingole, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Wear behavior of niobium boride coatings” Journal of ASTM International June 2005 2 (6).

·  S. Ingole, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Mixed-mode and multi-scale wear of boride coating on tungsten” Wear (2005) 259 (7-12) 849-860.

·  Umare S. S, Waware U. S, Ingole S, Viswanath S. G., “Influence of copolymer composition on the structure of conducting poly(aniline-co-o-phenylenediamine),” International Journal of Polymer Analysis and Characterization 10 (1-2): 1-13 Jan-Apr 2005.

·  S. Kumar, S. Ingole, H. Dieringa, K. U. Kainer, “Analysis of thermal cycling curves of short fiber reinforced Mg-MMCs” Composites Science and Technology (2003) 63(12) 1805-1814 ISSN: 0266-3538.

·  S. Kumar, S. Ingole, H. Dieringa, K. U. Kainer, “Thermal cycling of Mg-MMCs” Materials Science Forum (2003) pp 426-432(Pt. 3, THERMEC'2003) 2119-2124. ISSN: 0255-5476.

Conference Proceedings

·  S. Ingole et al., “Economical and Value Added Ceramic Coatings for Marine Structures,” National Conference on Emerging Technology and Developments in Civil Engineering, Amaravati, India, March 22-24, 2007

·  S. Ingole et al. “A review on: Applications of Nanotechnology in Civil Engineering in India,” National Conference on Emerging Technology and Developments in Civil Engineering, Amaravati, India, March 22-24, 2007

·  G. E. Totten, S. Ingole, H. Liang, "Surface modification using sonochemistry for tribological applications," 15th International Colloquium, Tribology 2006, Ed. W.J. Bartz, Technische Akademie Esslingen (Germany), 17-19 January, 2006.

·  Rahul Ribeiro, Poulomi Ganguly, Sudeep Ingole, Hong Liang, “Bio-mimetic study of novel materials for joint replacements,” Material Research Society’s 2005 Fall Meeting, November 28 - December 1, 2005, Boston.

·  S. Ingole, S. Kadri, H. Liang, K. Hartwig, “Shearing behavior of ductile metals using an atomic force microscope” World Tribology Congress III, Washington D.C. Sept. 12-16 2005.

·  R. Ribeiro, S. Ingole, J. Ortiz, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Friction and wear behavior of boronized chromium for biological applications” World Tribology Congress III, Washington D.C., USA, Sept. 12-16 2005.

·    S. Ingole, H. Liang, “Friction-induced phase transformations of Cu-Al during severe wear”, World Tribology Congress III, Washington D.C., USA, Sept. 12-16 2005.

·  S. Ingole, R Ribeiro, J. Ortiz, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Biotribological behavior of boronized tungsten”, World Tribology Congress III, Washington D.C. USA, Sept. 12-16 2005.

·  S. Ingole, R. Ribeiro, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Wear behavior of boronized chromium for biojoints applications”, International Surface Engineering Congress & Exhibition, St. Paul, Minnesota, USA, August 1-3 2005.

·  S. Ingole, H. Liang, P. Mohanty, “Tribology characteristics of NiTi coating on steel substrate”, International Surface Engineering Congress & Exhibition, St. Paul Minnesota, USA, August 1-3 2005.

Abstract Accepted

·  D. Wulff, S. Ingole, R. Ribeiro, H. Liang, M. Usta, “Boronizing of pure refractory metals for wear and corrosion resistance applications,” 61st Annual Meeting and Exhibition of Society of Tribologists and Lubrication Engineers, Calgary, Alberta, CA, May 7-11, 2006.

·  S. Ingole, S. Londhe, D. Ng, H. Liang, “ Prediction of friction for chemical mechanical polishing process using artificial neural network,” 61st Annual Meeting and Exhibition of Society of Tribologists and Lubrication Engineers, Calgary, Alberta, CA, May 7-11, 2006.

·  S. Ingole, P. Asthana, H. Liang, G. Totten, “Surface modification using sonochemistry for tribological applications,” 61st Annual Meeting and Exhibition of Society of Tribologists and Lubrication Engineers, Calgary, Alberta, CA, May 7-11, 2006.

·  Sudeep P. Ingole, Sharmili Datta, Pranay Asthana, Pravansu S. Mohanty, Hong Liang, “Friction-induced phase transformation in nickel-titanium thermal spray coatings,” Material Research Society’s 2005 Fall Meeting, November 28 - December 1, 2005, Boston.

·  Sudeep P. Ingole, Orlando Patricio, Catherine Leonida, Pranay Asthana, Srinivas Guruzu, Hong Liang, George Totten, “Surface modification through sonochemistry for tribological applications,” Material Research Society’s 2005 Fall Meeting, November 28 - December 1, 2005, Boston.

·  S. Ingole, John Smiley, Nagbhushana Nagendra, Sukumar Bandhopadhyay, “Crack growth studies in LaSrMO3 (M= Co, Fe, Cr) perovskites exposed to chemical environment,” 55th Pacific Coast Regional & Basic Science Division Fall Meeting, Oakland, CA, October 19–22, 2003.

·  S. Ingole, S. Seshan “Characterization of plaster cast low melting point alloys” Proceedings of International Conference on Perspective in Physical Metallurgy and Materials Science, July 12-14 2001 58.

Conference Presentations

·  S. Ingole, R. Ribeiro, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Wear behavior of boronized chromium for biojoints applications” International Surface Engineering Congress & Exhibition, St. Paul, Minnesota, USA, August 1-3, 2005.

·  S. Ingole, H. Liang, P. Mohanty, “Tribology characteristics of NiTi coating on steel substrate” International Surface Engineering Congress & Exhibition, St. Paul, Minnesota, USA, August 1-3 2005.

·  S. Ingole, S. Guruzu, M. Kulkarni, H. Liang, “Friction induced crystalline phases on Si” STLE 2005, Las Vegas, May 15-19 2005.

·  S. Ingole, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Mixed-mode and multi-scale wear of boride coating on tungsten” STLE 2005, Las Vegas, May 15-19 2005.

·  S. Ingole, S. Guruzu, M. Kulkarni, H. Liang, “Friction induced crystalline phases on Si” 15th International Conference on Wear of Materials (WOM’05), San Diego, USA April 24-28, 2005.

·  S. Ingole, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Mixed-mode and multi-scale wear of boride coating on tungsten” 15th International Conference on Wear of Materials (WOM’05) San Diego, USA, April 24-28 2005. 

Poster Presentations

·  Sudeep Ingole, Srinivas Londhe, “Prediction of Friction using Artificial Neural Network,” 2006 Gordon Research Conference on Tribology, Colby College, Waterville, ME, June 18-23 2006

·  S. Ingole, S. Kadri, H. Liang, K. Hartwig, “Shearing behavior of ductile metals using an atomic force microscope” World Tribology Congress III, Washington D.C. Sept. 12-16 2005.

·  R. Ribeiro, S. Ingole, J. Ortiz, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Friction and wear behavior of boronized chromium for biological applications” World Tribology Congress III, Washington D.C. Sept. 12-16 2005.

·  R. Ribeiro, S. Ingole, H. Liang, “Polyethylene as an implant material-tribological characteristics against boronized metals” Poly films Conference 2005: The Challenges of Globalization, Houston, Texas, Feb. 27 - March 2 2005.

·  S. Ingole, H. Liang, M. Usta, C. Bindal, A. H. Ucisik, “Mixed-mode and multi-scale wear of boride coating on tungsten” Gordon Research Conference 2004–Tribology, Roger William University, Bristol, RI, 26 June-2 July 2004.

·  S. Guruzu, M. Kulkarni, S. Ingole, G. Xu, C. Chen, H. Liang, “Friction induced crystalline phases on Si” Gordon Research Conference 2004–Tribology,  Roger William University, Bristol, RI, 26 June-2 July 2004.

Follow Us On: FacebookTwitteryoutube button